Filter
Aircraft cable galv. 7x7 - 3 mm x 500m
Length (m): 500
This cable can be perfectly applied for ventilation systems in greenhouses and other horticultural constructions.Material:Steel Galvanized
Login for price display
Wire clamp oval 2mm galvanized
Size (mm): Ø 2
Is used for the attachement of 2 mm aircraft wire. Material: Steel Galvanized
Login for price display
aircraft cable INOX 7x7
Length (m): 500
A durable, stainless aircraft cable for cable drive shadings systems. Thanks to these characteristics it specially fits external constructions. It is compatible with our slip joint. Tensile strength:Material: Stainless Steel
Login for price display
Pulley 40 (TGU) with splint bracket
PU (Pcs): 1
This plastic pulley has a split bracket for attachment to already strained cables. In this case the pulley functions as a guiding roller. Being turned around the pulley can be suspended with the included S-hook. In this position the pulley can divert cables. Made of high impact resistant plastic Diameter 40 mm Can be used for cables with a diameter up to 7 mm With an axel made of stainless steel Comes with a S-hook for suspending
Login for price display
Cable pulley 100 for wires until
PU (Pcs): 1
All-purpose 100 mm pulley made of high impact resistant plastic. The pulley can be used in shading systems as well as in several other application areas. Some of them are: construction and maintenance of fitness equipment, stage construction and media technique, construction of garage doors. Diameter 100 mmMaximum loading capacity: 170 Kg Double ball bearing with spacer ring For cord and wire with a maximum diameter of 9 mmCompatible with 10 mm bolts
Login for price display
Pulley with hook - PU = 5 pcs
This pulley serves a roller for strained cables in greenhouses. The pulley is not suitable for a subsequent installationon already cables.Check out our TGU pulley 40 for application.
Login for price display
Vent pulley unit - including hose clamps - PU = 50 pcs
PU (Pcs): 1
The vent pulley unit provides guided and controlled rolling-up of the ribbon in side ventilations with drop down fabrics. Thanks to the two-shell construction a later mounting in the installation is possible by attaching the pulley on both sides of the drive shaft with two hose clamps. Additonally it can be fixed onto the shaft with the included bolt. The vent pulley can be used for tubes with a diameter from 32 to 34 mm.Material: Plastic
Login for price display
Cable drum 1" - Typ II for tube 33,4 mm - Motion range 570 cm - PU = 12 pcs
PU (Pcs): 12
This grooved cable drum ensures friction free, well-ordered winding and therefore a smooth movement of driving cable in shading systems .Two-halves model of the drum makes it possible to fasten it onto drive shaft subsequently. The two halves are connected with four screws included intothe set. To install the drum onto the drive shaft a special headless screw is needed.The cable drum is made of high-impact resistant plastic, that is friendly to cables and therefore increases their durability. Can be used with cords with a diameter up to 3 mm For 34 mm drive shaftsCapacity of cable drum: up to 5,70 mMaterial:Cable drum: impact resistant plastic
Login for price display
Cable Pulley 75/8 with clamp - double ball bearing
PU: Box
Thanks to two ball bearings, the 75 mm pulley is guided particularly securely on the axle and has a high level of stability under shear loads.The galvanised steel bracket can be attached to your construction with an M8 screw. The retaining bracket can also be detached from the pulley to make installation as easy as possible, even in installation situations that are difficult to access. Impact resistant pulleyGalvanised steel bracketTwo ball bearingsLoad capacity: up to 350 kgMade in GermanyOuter diameter: 75 mmTotal height: 100,75 mmTotal width: 20 mmRope diameter: up to Ø 8 mmFastening with M8 screw / bolt
Login for price display
Cable pulley 100 with clamp - PU = 25 pcs
PU (Pcs): 25
This 100 mm pulley is bolted to a clamp. If needed, the pulley can be reclamped and removed or replaced. Material: Pulley: high impact resistant plasticClamp: Galvanized steel
Login for price display
Cable pulley 100 with clamp - Wires until
PU (Pcs): 1
This 100 mm pulley is bolted to a clamp. If needed, the pulley can be reclamped and removed or replaced. Material: Pulley: high impact resistant plasticClamp: Galvanized steel
Login for price display
Cable Pulley 90/8 with clamp - Pkg - 50 pcs
PU: Box
Thanks to two ball bearings, the 90 mm pulley is guided particularly securely on the axle and has a high level of stability under shear loads.The galvanised steel bracket can be attached to your construction with an M8 screw. The retaining bracket can also be detached from the pulley to make installation as easy as possible, even in installation situations that are difficult to access. Impact resistant pulleyGalvanised steel bracketTwo ball bearingsLoad capacity: up to 350 kgMade in GermanyOuter diameter: 90 mmTotal height: 115,75 mmTotal width: 41 mmRope diameter: up to Ø 8 mmFastening with M8 srew / bolt
Login for price display
Cable drum 1" - type IV - Motion range
PU (Pcs): 1
This grooved cable drum ensures friction free, well-ordered winding and therefore a smooth movement of driving cable in shading systems .Two-halves model of the drum makes it possible to fasten it onto drive shaft subsequently. The two halves are connected quick and easy with U-bolt. To install the drum onto the drive shaft a headless screw is needed.The cable drum is made of high-impact resistant plastic, that is friendly to cables and therefore increases their durability. Can be used with cords with a diameter up to 3 mm For 34 mm drive shaftsCapacity of cable drum: up to 5,70 mMaterial: Cable drum: High impact resistant plasticU-Bolt: Galvanized steel
Login for price display
Steel tube galv. narrowed, 1'' / 2,5mm - L= 6,50 m - Bundle = 81pcs
PU: Bunch
This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel
Login for price display
Cable pulley 52/4
PU: 1 | Version:: Plain bearing
Due to the extra wide plain bearing, the 52 mm pulley is guided particularly safely on the axle and has a high stability under shear loads.Together with the plain bearing, the pulley is made of 100 % plastic and is therefore completely protected against corrosion and other environmental influences.Impact resistant pulleyPlain bearing insertsLoad capacity: up to 150 kgMade in GermanyOuter diameter: 52 mmcompatible with 10 mm boltTotal width: 20 mmRope diameter: up to Ø 4 mm
Login for price display
Double swivel pulley 50
PU (Pcs): 1 | Version: Double
Swivel pulley made of high impact resistant plastic with one rotatable and one fixed mounting eye. This model allows cable to go through the housing.This pulley has no ball bearing.
Login for price display
Steel tube, galvanized 1"
PU: Bunch
This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized
Login for price display
Chain bolted coupling for RW 240/400/600/800 tube 1''
Version: Tube Ø 1 "
The chain coupling connects an existing chain wheel at the gear motor with a drive shaft and help tos to create a more flexible drive system. The coupling gets heat sealed on top of the drive shaft. The double chain of this coupling enables the drive shaft to move in the line. This construction creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: Galvanized steelRidder Art.-Nr.: 590016
Login for price display
Chain coupling for RW 45 - tube
Version: Tube 1"
Chain coupling connects motor gearbox chain wheel with a drive shaft and provides higher flexibility of the driving system.The coupling gets welded to drive shaft.The duplex chain of this coupling enables the drive shaft to move in the line. Such a structure creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: galvanized steelRidder Art.-Nr.: 590000
Login for price display
Lock EWA 12.2505 / 250 Nm / 400 V - 4,4 rpm - We 66
250 Nm 400 V 3~, 50 Hz 4,4 Umdrehungen/Minute 0,30 kW 1,10 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
Login for price display
Lock EWA 12.1505 / 150 Nm / 400 V / 50 Hz / E20 - 4,3 rpm - We 66
150 Nm 400 V 3~, 50 Hz 4,4 Umdrehungen/Minute 0,17 kW 0,90 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
Login for price display
Power drive Lock EWA 10.0505 50 Nm 5,6 U/min - Welle 06 400V - 12210.0505.06
50 Nm400 V 3~, 50 Hz5,6 Umdrehungen/Minute0,11 kW0,45 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
Login for price display