Tube connectors halfs 1" - incl. 4 bolts M8 x 45
These tube connector halves are used for reliable connection of 34 mm steel tubes for drive shafts. Compared to heat-welded connection our tube connector halves offer higher stability and durability. The connector halves are bolted to the steel tubes with the included M8x50 bolts. Material: Steel, galvanized
Clamping strip, PVC
This clamping strip is used to fix the greenhouse film to the aluminium Poly Lock Profile.
Steel tube galv narrowed
This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel
Steel tube - 32/1,5, galvanized, swaged - 6500 mm
This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel
Al. tube for roll up curtains 50mm Type 2 L=6,40mm - 2 grooves
Das ideale Rollschirmrohr für Twin-Rollschirme. Es ist ausgestattet mit zwei Nuten zum Einführen des Gewebes.Material: Aluminium
Steel tube, galvanized 1"
This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized
Adaptor Tube
Application: Connector in telescopic systems – between universal joint and steel pipe Compatibility: Suitable for 34 mm pipes with 2.5 mm wall thickness and 32 mm pipes with 1.5 mm wall thickness Material: Galvanized steel – robust and corrosion-resistant Installation: Inserted into the pipe – ideal for TransAxle units as well as single and double universal joints Packing unit: 1 piece Special features: Enables backlash-free, force-locking connection Suitable for shading and ventilation systems in greenhouse construction The Pipe Adapter Ø 33.4 × 2.5 mm is a versatile connector for telescopic systems in greenhouse installations. It serves as a transition between universal joints and steel pipes, ensuring a secure, backlash-free connection. Thanks to its compatibility with different pipe diameters and its robust galvanized steel design, it's ideal for durable and low-maintenance applications.
Adaptor axle 26
Application: Connection between lock motor and drive shaft with universal joint Material: Durable steel for high stability and long service life Function: Ensures stable power transmission The Adapter for Lock Motor 1" / Universal Joint provides a reliable connection between the lock motor and the drive shaft. Its sturdy steel construction ensures excellent stability and long-term durability.
Aluminum tube for rollup curtains 50 mm Type I
Das ideale Rollschirmrohr für Single-Rollschirme. Es ist ausgestattet mit einer Nut zum Einführen des Gewebes.Material: Aluminium
U-joint with bolts and nuts - (without adaptor)
Application: Universal joints for drive shafts in shading and ventilation systems Bearings: Equipped with high-quality needle bearings for precise and durable motion transfer Adapters: Screw-on adapters available for a wide range of shaft formats Design: Slim and space-saving – robust and durable, made of black-coated steel Technical Specs: Maximum bending angle 34°, torque up to 70 Nm The Universal Joints for RW Drive Shafts ensure reliable power transmission in shading and ventilation systems with variable shaft routing. Thanks to integrated needle bearings, they provide smooth operation under high loads. Optional adapters allow easy screw-on connection to various shaft formats, offering maximum flexibility during installation. With their compact design and black-coated steel construction, these joints are both space-efficient and highly resistant – ideal for demanding environments.
Aluminum splice for rollup 230 mm, 50mm - PU = 85 pcs
Application: Connector for 50 mm roll-up tubes (Type I & II) Length: 230 mm Material: Aluminum Mounting: Inserted into the tube and secured with aluminum rivets Packaging unit: 85 pieces The Aluminum splice for roll-up tube – 230 mm / Ø 50 mm is inserted into the roll-up tube and secured with rivets to ensure a strong, permanent connection. Compatible with both Type I and Type II 50 mm aluminum tubes used in greenhouse shading systems.
Steel tube, galvanized swaged
This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 27 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel
Adapter for telescope on
Application: Adapter between telescopic drive unit and 50 mm roll-up tube Material: Aluminum Compatibility: Fits with TGU telescopic unit (e.g. item 24100407) Use case: For lightweight greenhouses and side ventilation systems The Adapter for telescopic unit to Ø 50 mm roll-up tube enables connection between a telescopic drive (e.g. TransAxleUnit) and a 50 mm roll-up tube. Ideal for lightweight greenhouse structures such as foil tunnels. Made of durable aluminum and easy to install.
Tower Roller Plus Guide Rail
This rail is a guide for motor mount and counter-weight in Tower Roller Plus System. The counter-weight side of the rail is equipped with a slot for a plastic cover to be inserted as a protection from accidents. The guide rail can be attached very quickly into the Tower Roller System. It is very stable and perfectly suitable for roll-up screens.
Tower Roller Plus guide incl. guiding rails cover
Application: Motor mount and counterweight carriage for Tower Roller Plus systems Features: Includes guiding rail cover for added safety Design: Lightweight, compact, and maintenance-free Compatibility: For all standard motors - counterweight matched to system The Tower Roller Plus Roll Console incl. guiding rail cover is the central moving unit in the Tower Roller Plus system. It carries the motor and counterweight, runs on high-strength plastic rollers, and includes a protective cover for the guide rail. Designed for long-lasting, low-maintenance operation in greenhouse environments.
Tower-Roller Plus Set
The Tower Roller Plus Set is part of our Tower Roller Plus drive system, which features the following properties: Drive system for medium and large roller screens, as well as rollable side vents and room partitions. Suitable for system lengths up to 120 meters with an extremely narrow installation depth of approximately 80 mm. Reduced weight, assembly time, and costs. Extremely durable and almost maintenance-free, thanks to the high-strength plastic rollers and the standard anodized aluminum profile. Reduced risk of accidents due to completely integrated and covered counterweights and pulleys. Integrated cable routing with energy chain. Compatible with all common motors (counterweight is adjusted accordingly).
Aluminum poly lock profile - L = 6000 mm
Application area: Fastening greenhouse films to the supporting structure Material: Aluminum – lightweight, strong, and corrosion-resistant Length: 6,000 mm Installation: Screw-mounted via integrated mounting tab Function: Secures the film using two-part PVC locking strips Special features: Two-part design simplifies installation and removal Protects both film and profile during handling Ideal for permanent and secure film fastening The aluminum film locking profile with a length of 6,000 mm is a practical solution for securely fastening greenhouse films. It is screwed directly onto the greenhouse structure using the integrated mounting tab. The inserted film is secured with two-part PVC locking strips, creating a durable connection without damage. The well-thought-out design not only simplifies installation but also protects the materials during later removal—ideal for professional film greenhouses.
Adaptor extended - Tube 27 x 1,5 galvanized
Application: Connector for telescopic systems in greenhouse installations Material: Galvanized steel for high durability and corrosion resistance Compatibility: Suitable for 27 mm pipes with 1.5 mm wall thickness Special feature: Extended version allows integration of a spacer roller The Extended Adapter Pipe 27 × 1.5 Galvanized functions as a connecting element between universal joints and steel pipes in telescopic systems. Its extended design enables the use of a spacer roller, such as those found in TGU TransAxle Units. The high-quality galvanization ensures excellent longevity and corrosion protection.
Adaptor - Tube 27 x 1,5
Application: Connector in telescopic systems – between universal joint and steel pipe Compatibility: Suitable for 27 mm pipes with 1.5 mm wall thickness Material: Galvanized steel – robust and corrosion-resistant Special feature: Enables a backlash-free, force-locking connection The Adapter Pipe 27 × 1.5 is a versatile connector used in telescopic systems for greenhouse installations. It serves as a reliable transition between universal joints and steel pipes, offering a secure, backlash-free fit. Its galvanized steel build ensures long-lasting, low-maintenance performance in demanding environments.
Adaptor for tower-roll 50 mm for RW 240
Application: Adapter between RW 240 gear motor and 63 mm roll-up tube Material: Aluminum Compatibility: Specially designed for the TGU Tower Roller Plus system Mounting: Inserted between motor and roll-up tube The Adapter for Tower-Roller 50 mm – for RW 240 connects the RW 240 gear motor to a 63 mm roll-up tube. It is precision-milled from aluminum and optimized for use in the TGU Tower Roller Plus system.
Aluminum splices for roll up tube 250 mm, 63mm - PU = 45 pcs
Application: Connector for 63 mm roll-up tubes (Type II) Length: 250 mm Material: Aluminum Mounting: Inserted into the tube and secured with aluminum rivets Packaging unit: 45 pieces The Aluminum splice for roll-up tube – 250 mm / Ø 63 mm is inserted into the roll-up tube and secured with rivets to ensure a strong, permanent connection. Compatible with 63 mm aluminum tubes (Type II) used in greenhouse shading systems.
Adapter extended Tube 1Z x 2,5, 32 x 1,5 galvanized
Application: Adapter for telescopic systems connecting universal joints and steel pipes Material: Galvanized steel for high corrosion resistance Size: Suitable for 32 mm pipes with 1.5 mm wall thickness Special features: Extended version enables use of a spacer roller Compatibility: Optimized for TransAxle Units and single/double universal joints The Extended Adapter Pipe 32 × 1.5 Galvanized is designed for telescopic systems as a connector between universal joints and steel pipes. Its extended form allows for spacer roller integration, commonly used in TGU TransAxle Units. The galvanized steel build ensures optimal durability in greenhouse environments.