Rohrmotor
Our compact wire tigthener is very helpful by installing wires in narrow areas of shading systems and other constructions. The tightener provides more stable position of your cables and wires ,than other tigthener do.(Fixing only M6)
Application: Connecting push-pull tubes Ø 27 and Ø 32 mm in greenhouse systems Dimensions: M6 × 30 mm Material: Galvanized steel Features: Bolt head and nut sit flush with the tube to avoid collision with roller housings Packaging unit: 100 pieces The Bolts M6×30 with nuts for steel tube 27.32 are designed for connecting 27 mm and 32 mm push-pull tubes in greenhouse shading and ventilation systems. The flush fit prevents interference with diabolo roller housings.
The fitting endclip for the 10 x 10 energy chain. The endclip comes with holes for the attachement to the roll up bracket. Material: Plastic
The guide profile for tubular motors in conjunction with our roller carriage ensures, that your tubular motor is guided straight in roll up systems.
Application: Horizontal shading systems in greenhouses Voltage: 230 V (120 V version also available) Torque: 50 Nm Speed: 12 rpm Mounting: Delivered with 10×10 mm square shaft adapter Tube compatibility: For 50 mm and 63 mm roll-up tubes Limit switches: Externally adjustable with Allen key The FRM50 tube motor 50-12-230 is a durable and robust drive unit for greenhouse shading systems. It offers easy installation and adjustment, and is compatible with standard motor guides and brackets.
Application: Maintenance-free drive for roll screen systems in greenhouses and livestock buildings Material: Built into an aluminum tube with 50 mm diameter and 1.5 mm wall thickness Motor: Low-noise, single-phase, 2-pole asynchronous electric motor Limit switch: Precise electronic limit switch system with pulse counter (38 revolutions) Protection class: IP55 – high water resistance Torque: 50 Nm at 50 Hz Speed: 3.5 rpm at 50 Hz Ridder Article No.: 550032 The RB50E+ - 3.5-230/50/VK10/B50/L772 tubular motor is a powerful and maintenance-free drive unit for roll screen systems in greenhouses and livestock buildings. Thanks to its quiet operation and high water resistance, it is ideal for demanding environments. The integrated electronic limit switch system with pulse counter ensures precise control and protects the motor from overload. The IP55 protection rating allows reliable operation even in humid conditions. The motor is designed for intermittent operation and provides reliable braking performance, even under low voltage conditions.
This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel
The endguide with bearing provides roll up tubes guiding at the side, that faces the tube motor. Therefore it is installed into the roll up tube. Material: aluminium
Das ideale Rollschirmrohr für Twin-Rollschirme. Es ist ausgestattet mit zwei Nuten zum Einführen des Gewebes.Material: Aluminium
Application: For sidewall and dual roll-up screen systems in greenhouses Voltage: 230 V / 50 Hz (also available for 60 Hz) Torque: 120 Nm Speed: 11 rpm (50 Hz) / 13 rpm (60 Hz) Limit switches: Mechanical, adjustable (38 turns) Tube compatibility: For 63 mm roll-up tubes Protection class: IP44 Ridder Article No.: 550180 The RB120-11-44 tube motor is a high-torque, maintenance-free drive unit for large greenhouse shading systems. It features a sealed housing, integrated brake, and a robust planetary gearbox for long-lasting performance.
Application: For horizontal shading systems in greenhouses Voltage: 230 V, 1-phase Torque: 3.5 Nm Speed: 13 rpm Limit switches: Mechanical, adjustable Compatibility: For 50 mm drive tubes Ridder Article No.: 550025 The RB50-3.5-13 tube motor is a compact and efficient drive for greenhouse shading systems. It features mechanical limit switches and is compatible with 50 mm roll-up tubes. Ideal for small to mid-sized installations.
Das ideale Rollschirmrohr für Single-Rollschirme. Es ist ausgestattet mit einer Nut zum Einführen des Gewebes.Material: Aluminium
Application: Motor guide for RB120-11/13 tube motors in vertical guide rails Material: Galvanized steel Mounting: Accepts 16×16 mm square pin - secured with cotter pin Function: Absorbs axial and rotational forces of the motor Ridder Article No.: 550505 The Guiding unit VK16 / L170 is designed for RB120 tube motors and ensures stable and precise movement within the guide rail. It is built to absorb both axial and rotational forces and is secured with a 16 mm square pin and cotter pin.
Application: Connector for 50 mm roll-up tubes (Type I & II) Length: 230 mm Material: Aluminum Mounting: Inserted into the tube and secured with aluminum rivets Packaging unit: 85 pieces The Aluminum splice for roll-up tube – 230 mm / Ø 50 mm is inserted into the roll-up tube and secured with rivets to ensure a strong, permanent connection. Compatible with both Type I and Type II 50 mm aluminum tubes used in greenhouse shading systems.
Product type: Strap tensioner set consisting of tensioner and strap holder Material: Both components made of galvanized steel Mounting: Tensioner with 3 pre-drilled holes, holder with 2 pre-drilled holes Function: Self-locking tensioner for secure and durable tensioning Compatibility: Suitable for straps and 8 mm polyester cord Application: Used to tension straps or cords in front of roll screen systems as wind protection The strap tensioner set includes a self-locking tensioner and a matching strap holder – both made of durable galvanized steel. The tensioner features three pre-drilled holes for secure mounting, while the holder has two. This set is ideal for tensioning straps or 8 mm polyester cords, for example in front of roll screen systems to serve as wind protection. The self-locking mechanism ensures reliable tension without the need for readjustment. Thanks to its robust construction and versatile use, the set is a dependable solution for professional greenhouse installations.
Transparent woven fabric, providing a high light transmittance and at the same time saving energy can be used as side ventilation, dividing walls. Due to on sided lamination it is suitable for inside roll-up systems.Note:Further processing such as cutting and sewing is not included the price.
Woven fabric with two-sided white lamination, opaque to provide darkening for plants. It can be used as dividing walls or roll-up screens inside and outside.Note:Further processing such as cutting and sewing is not included the price.
Application: Connector for 63 mm roll-up tubes (Type II) Length: 250 mm Material: Aluminum Mounting: Inserted into the tube and secured with aluminum rivets Packaging unit: 45 pieces The Aluminum splice for roll-up tube – 250 mm / Ø 63 mm is inserted into the roll-up tube and secured with rivets to ensure a strong, permanent connection. Compatible with 63 mm aluminum tubes (Type II) used in greenhouse shading systems.
Das ideale Rollschirmrohr für Twin-Rollschirme. Es ist ausgestattet mit zwei Nuten zum Einführen des Gewebes.Material: Aluminium
Note:Further processing such as cutting and sewing is not included the price.
Our roll up bracket is used to attach the energy chains to your motor guide.The bracket has pre-punched mounting holes for various directions of fixation. Material: Galvanized steelRidder Art.-Nr. 423712
Application: For horizontal shading systems in greenhouses Voltage: 230 V (120 V version available on request) Torque: 120 Nm Speed: 7 rpm Tube compatibility: For 50 mm and 63 mm roll-up tubes Limit switches: Externally adjustable with Allen key Mounting: Delivered with 16×16 mm square adapter for motor guide The FRM120 tube motor 120-7-230 is a robust and durable drive unit for greenhouse shading systems. It features high torque and easy installation, with externally adjustable limit switches and compatibility with standard roll-up tubes.
Application: Used to attach roll-up fabric to purlins in greenhouses Material: Stainless steel (Inox) Design: Specially shaped for secure grip on U-purlins Packaging unit: 100 pieces The Purlin clip 45 special “for roll-up” is used to fasten roll-up curtain fabric to U-profile purlins in greenhouse structures. Made of corrosion-resistant stainless steel, it ensures a secure and durable connection. Supplied in packs of 100.
