Steel tube galv. 2"

Application area: Uniform winding of wire ropes in shading systems Material: Impact-resistant plastic for high durability Capacity: Winding length 570 cm Installation: Retrofittable onto the drive shaft Special feature: Two-part design with hose clamp connection The Cable drum 2″ – Type III enables structured winding of wire ropes via pre-grooved plastic, ensuring smooth cable movement within the shading system. Friction between wound wires and ropes is effectively prevented. Thanks to its two-part design, the cable drum can be retrofitted onto the drive shaft. The two halves are joined using a hose clamp, while the drum is secured to the shaft with a set screw. The impact-resistant plastic protects the wire rope and extends its service life. Suitable for wire ropes with a diameter of up to 3 mm.

Application: Even winding of drive cables in greenhouse shading systems Material: Impact-resistant plastic for high durability Capacity: Winding length of 570 cm Installation: Can be retrofitted onto the drive shaft Feature: Two-piece design with hose clamp connection Cable drum 2&quot - – type III ensures smooth and orderly winding of drive cables in shading systems by means of its pre-grooved inner surface. This guides the cable precisely and helps prevent overlap and wear. The two-shell construction allows for easy retrofitting onto existing drive shafts. The drum halves are connected with a hose clamp, and the drum is fixed to the shaft using a set screw. Made of durable, impact-resistant plastic, the drum is gentle on cables and extends their service life. Suitable for drive cables up to 3 mm in diameter.