Worm drive 1:16 installation 2 m / chain 4 m

This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized

This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel

Einsatzbereich: Geeignet für Schattieranlagen mit Drahtseilantrieb Material: Schlagfester Kunststoff für hohe Stabilität und Langlebigkeit Funktion: Geordnetes Aufwickeln des Drahtseils durch Vorkerbung im Kunststoff Montage: Zweischaliger Aufbau ermöglicht nachträgliche Installation auf der Antriebswelle Kapazität: Fasst bis zu 5,70 m Seil Geeignet für: Drahtseile bis 3 mm Durchmesser und Antriebswellen von 34 mm Verpackungseinheit: 12 Stück Die Seiltrommel 1" - Typ I ermöglicht durch die Vorkerbung im Kunststoff ein geordnetes Aufwickeln des Drahtseils, wodurch ein gleichmäßiger Laufweg in der Schattieranlage gewährleistet wird. Dank des zweischaligen Aufbaus kann die Seiltrommel nachträglich auf der Antriebswelle installiert werden. Die beiden Schalen werden mit zwei mitgelieferten Achsschrauben verbunden, die die Trommel sicher auf der Welle fixieren. Das schlagfeste Kunststoffmaterial schont das Drahtseil und erhöht dessen Lebensdauer, wodurch die Seiltrommel ideal für den langfristigen Einsatz geeignet ist.

This grooved cable drum ensures friction free, well-ordered winding and therefore a smooth movement of driving cable in shading systems .Two-halves model of the drum makes it possible to fasten it onto drive shaft subsequently. The two halves are connected with four screws included intothe set. To install the drum onto the drive shaft a special headless screw is needed.The cable drum is made of high-impact resistant plastic, that is friendly to cables and therefore increases their durability. Can be used with cords with a diameter up to 3 mm For 34 mm drive shaftsCapacity of cable drum: up to 5,70 mMaterial:Cable drum: impact resistant plastic

This grooved cable drum ensures friction free, well-ordered winding and therefore a smooth movement of driving cable in shading systems .Two-halves model of the drum makes it possible to fasten it onto drive shaft subsequently. The two halves are connected quick and easy with a hose clamp and then installed onto the drive shaft with a headless screw.The cable drum is made of high-impact resistant plastic, that is friendly to cables and therefore increases their durability. Can be used with cords with a diameter up to 3 mm For 34 mm drive shaftsCapacity of cable drum: up to 5,70 m

This grooved cable drum ensures friction free, well-ordered winding and therefore a smooth movement of driving cable in shading systems .Two-halves model of the drum makes it possible to fasten it onto drive shaft subsequently. The two halves are connected quick and easy with U-bolt. To install the drum onto the drive shaft a headless screw is needed.The cable drum is made of high-impact resistant plastic, that is friendly to cables and therefore increases their durability. Can be used with cords with a diameter up to 3 mm For 34 mm drive shaftsCapacity of cable drum: up to 5,70 mMaterial: Cable drum: High impact resistant plasticU-Bolt: Galvanized steel