Tube motor Ridder RB120-11-44\230\1\50\36 - 230V, 120 Nm

Application: Shaft support for suspended shading systems with gable drive Material: Hot-dip galvanized steel for high stability and corrosion resistance Installation: Square tubes are flanged directly onto the bracket Special feature: Reversible plate compatible with all common tubular motors Handling: No manual alignment of the drive shaft required The Tubular Motor Bracket 50.50 with Insert 10×10 and 16×16 mm positions the drive shaft precisely for the motor system and simplifies installation thanks to its intuitive handling. It is ideal for suspended shading systems with gable drive. The bracket is perfectly matched to 50 mm square tubes and only needs to be secured with a bolt and nut. Thanks to the reversible plate, it is compatible with all standard tubular motors.

Application: Ensures straight vertical guidance of tubular motors in roll-up systems Length: 4000 mm Material: High-strength aluminum profile Compatibility: Used in combination with TGU roller carriage Mounting: For vertical installations in greenhouses The Guide rail for tube motor 4000 mm provides precise and stable guidance for tubular motors in vertical roll-up systems. It is used together with a roller carriage and is ideal for greenhouse side ventilation or shading systems.

Application: Screen guiding tube for suspended or lay-flat shading systems Length: 6.00 m Diameter: 19 mm Material: Lightweight aluminum Packaging: Loose (individual pieces) The Aluminum tube 19 mm – 6.00 m is used as a screen guiding tube in greenhouse shading systems. Its lightweight construction makes it ideal for wide-span greenhouses and a practical alternative to traditional steel tubes.

Application: Motor guide for RB120-11/13 tube motors in vertical guide rails Material: Galvanized steel Mounting: Accepts 16×16 mm square pin - secured with cotter pin Function: Absorbs axial and rotational forces of the motor Ridder Article No.: 550505 The Guiding unit VK16 / L170 is designed for RB120 tube motors and ensures stable and precise movement within the guide rail. It is built to absorb both axial and rotational forces and is secured with a 16 mm square pin and cotter pin.