Application: Connecting support wires to 19 mm aluminum tubes in greenhouse shading systems Material: High-quality plastic for long-term durability Feature: Raised geometry for improved sealing in specific greenhouse types Packaging Unit: 3000 pcs Lead edge tube clip L 19 is designed for securely linking support wires with 19 mm aluminum tubes in shading installations. Its robust plastic construction ensures reliable fastening and long-lasting performance under greenhouse conditions. The elevated design creates additional spacing between wire and tube, which can enhance sealing efficiency—especially beneficial in closed energy curtain systems where insulation and airflow control are critical.

Application: Gentle fabric fastening on 19 mm steel and aluminum tubes in shading systems Material: Plastic – protects fabric from damage Tube Diameter: 19 mm Installation: Simple clip-on – tool-free Packaging Unit: 2,000 pcs Features: Much gentler than metal clamps Ideal for laid-on and suspended shading systems Easy handling during installation and removal Tube Clip 19 mm offers a proven solution for attaching shading fabric to 19 mm tubes in greenhouse systems. Its plastic body prevents damage to the fabric—unlike conventional metal clamps. The clip snaps onto the tube securely and protects the material while ensuring firm hold. Perfect for long-lasting, low-maintenance shading systems under high load.

Application area: Gentle fabric fastening for 17–19 mm steel and aluminum pipes Material: High-quality plastic that protects the fabric from damage The Tube clip 17 mm is specifically designed for fastening fabric to 17–19 mm steel and aluminum pipes. Thanks to its high-quality plastic construction, it does not damage the fabric—unlike metal clamps.

Application: Sealing overlap between fabric panels in suspended shading systems Material: Fabric-compatible plastic Function: Attached to carrier wire - picks up the following fabric panel via cord for seamless overlap Packaging Unit: 200 pcs Sealing bracket for 2 mm stainless steel wire is used to seal the transition between adjoining fabric panels in suspended greenhouse shading systems. Made from plastic that protects the screen material, it ensures a gentle yet stable attachment to the carrier wire. The bracket is mounted directly on the carrier wire and is connected to the next fabric panel using a cord. This creates a consistent overlap between panels that helps minimize light leakage and contributes to a clean and functional screen layout. The same type of wire is also used in some laid screen configurations.

Application: Guiding push rods in greenhouse shading and ventilation systems with push-rod drive Material: High-quality plastic for long-term use Packaging Unit: 1000 pcs Diabolo Roller 27.32 is designed for precise guiding of push rods in greenhouse shading and ventilation systems that use push-rod drive mechanisms. Its durable plastic construction ensures high resistance to wear and a long service life, even under continuous load and environmental stress.

Application: Guiding 19 mm aluminum tubes along polyester wires in shading systems Material: Galvanized steel Installation: Mounted onto polyester wire, then clipped onto the 19 mm aluminum tube Wire Guide (short) 13 mm is designed to securely guide aluminum tubes along polyester wires in greenhouse shading installations. First attached to the wire, it is then clipped onto the tube, ensuring a straight and stable movement of the fabric panels. The fixed spacing of 13 mm between wire and tube supports consistent alignment and smooth operation, especially in suspended shading systems where precise guidance is essential.

Application: Fabric fixation on 19 mm tubes in greenhouse shading systems Material: Stainless steel for high durability and corrosion resistance Feature: Provides a particularly firm and stable hold Packing unit: 500 pieces The Tube Clip, Stainless steel offers the same robust performance as the 100-piece version, but in a larger packing unit for high-volume installations. It ensures secure fabric attachment to 19 mm tubes and is ideal for commercial greenhouse applications requiring consistent and strong fixation.

Application: Connecting 19 mm aluminum tubes for fabric routing Material: Aluminum Feature: Adjustable angle for precise alignment Mounting: Preassembled on ground - final angle set during installation Packaging Unit: 250 pcs Lead edge elbow fits 19 act as a flexible joint between 19 mm aluminum tubes, enabling accurate alignment of fabric guides. Thanks to its adjustable angle, it supports precise directional control. Installation is carried out via plug-in connection and mechanical interlocking using a lightly roughened tube surface.

Application: Static connection for 19 mm aluminum and steel tubes Material: High-quality plastic for lightweight yet sturdy bonding Installation: Simple plug-in assembly secured with pliers Feature: Fast, screwless installation - non-detachable connection Packaging Unit: 300 pcs Lead edge connector 19 L offers a reliable and time-saving method for joining 19 mm aluminum and steel tubes in static greenhouse structures. The clip-on design locks securely when pressed with pliers, eliminating the need for additional fasteners while maintaining a firm hold. Made of premium plastic, it provides long-term durability with minimal weight—perfect for fixed assemblies and structural frames in shading or greenhouse systems.

Application: Bearing support for 34 mm drive shafts in ventilation and shading systems Material: Galvanized steel for high corrosion resistance Mounting: Equipped with mounting holes for M8 screws Feature: Two-piece housing allows easy bearing replacement Pillow block 1" with bearing is a robust and durable solution for supporting 34 mm drive shafts in greenhouse ventilation and shading systems. Its galvanized steel construction ensures long-term corrosion resistance, making it ideal for demanding environments. The two-piece design enables quick replacement of the ball bearing when needed. With integrated M8 mounting holes, it offers secure and stable installation—perfect for professional greenhouse applications.

Application: Repair set for replacing damaged shaft hangers Material: Sturdy construction for long-term use Installation: Easy mounting without disassembling the drive shaft hanger Feature: Protects drives and pipes with a special plastic ring Packing unit: 25 sets The TGU Shaft Hanger Repair Set 1″ provides a convenient solution for quick replacement of damaged shaft hangers. The innovative design allows installation directly around the pipe, eliminating the need for time-consuming disassembly. Its durable build makes it suitable for both new and older greenhouse systems. The integrated plastic ring helps prevent wear and abrasion on surrounding components. Ideal for large-scale installations and maintenance, this set enables fast repair by a single person while ensuring a secure, long-lasting connection.

Application: Bearing support for 34 mm drive shafts in greenhouse ventilation systems Material: Galvanized steel Installation height: 77 mm (from base to shaft center) Design: Straight mounting holes Bearing type: Bronze sintered ring – maintenance-free Ridder Article No.: 503095 The Slide bearing plate B077 L107 is designed for slightly elevated shaft positions. Its bronze bearing ring provides a durable, low-friction solution that eliminates the need for grease or oil.

Application: Joining 34 mm steel tubes in drive shafts Material: Hot-dip galvanized steel for superior strength and corrosion resistance Installation: Screwed together using included M8x50 bolts Highlight: Greater stability and longevity compared to welded joints Packaging Unit: 25 sets 1" Steel Tube Clamp Connectors incl. M8x50 Screws provide a secure and reliable connection for 34 mm steel tubes in drive shaft assemblies. Unlike welded joints, these clamp connectors offer improved durability and structural integrity. Each set includes M8x50 screws for quick installation. Thanks to the hot-dip galvanized finish, the connectors offer excellent corrosion protection, making them well-suited for long-term use in challenging environments.

Application: Suitable for shading systems with suspended fabric and gable drive configuration Material: Impact-resistant plastic for high stability Function: Ensures accurate positioning of the drive shaft Packaging Unit: 25 pcs Offset bearing for 50/50 mm square tube is specifically designed for use in greenhouse shading systems featuring suspended fabric and a gable-driven layout. It accurately positions the drive shaft and supports smooth rotational movement during operation. Made from durable, impact-resistant plastic, this component provides high load-bearing capacity and long-term performance, even under challenging greenhouse conditions. Installation requires an M8 x 70 bolt and one M8 Nyloc nut (not included).

Application: Support plate for fastening drive shafts in shading systems Material: Aluminum for high stability and corrosion resistance Mounting: Angled shape ensures secure attachment to structural elements Height: Center of pipe: 40 mm Special feature: Lightweight design for easy installation The Angled Aluminum Support Plate 1″ offers a reliable solution for mounting drive shafts in greenhouse shading systems. Its angled shape ensures a stable and secure installation. The high-grade aluminum provides excellent resistance to environmental conditions and long service life. Ideal for professional greenhouse applications, it enhances the efficiency and durability of shading structures.

Application: Sealing open tube ends in greenhouse constructions Material: High-quality plastic for long-lasting use Function: Protects against dirt, moisture, and mechanical impact Color: Black Packaging Unit: 100 pcs Plug for 19 mm tube is a practical solution for securely closing open pipe ends in greenhouse structures. It shields the interior from environmental influences and extends the lifespan of the system. The flexible lamella design ensures a tight fit, while the premium plastic material offers durability and ease of installation—even in humid or high-contact environments.

Application: Suitable for central drives in suspended and laid-out shading systems Material: High-quality plastic for long-term durability Function: Forms the bearing support for the drive shaft and ensures precise alignment Feature: Extended version for 34 mm pipes Packing unit: 20 pieces The 4 Bearing Shaft Support 1″ Extended is specially designed for central drives and positions the shaft precisely within greenhouse systems. The plastic construction provides robust and lasting performance, ideal for long-term use.

Application area: Suitable for shading systems with suspended fabric and gable drive Material: Impact-resistant plastic for high stability Function: Positions the drive shaft at the ideal location Packaging unit: 25 pieces The Offset bearing 1" for square tube 50.34 is specifically designed for shading systems where the fabric is suspended and a gable drive is used. It ensures optimal positioning of the drive shaft and enables smooth rotation. Thanks to its impact-resistant plastic construction, the bearing offers high stability and is designed to handle tensile loads, making it ideal for long-term use. Installation requires an M8 × 70 screw and an M8 Nyloc nut.

Application area: Guidance of push rods in shading systems with push rod drive Material: Diabolo roller made of plastic, housing made of galvanized steel Installation: Secure fastening through robust housing design Special feature: Optimal guidance of push rods for smooth movement The Diabolo roll 27.32 with stamped sheet housing is a proven solution for guiding push rods in shading systems with push rod drive. It ensures precise and smooth movement of the push rods, contributing to the optimal performance of the system. The roller is made of high-quality plastic, while the housing is crafted from durable stamped sheet steel to ensure maximum stability and longevity. Its thoughtful design allows for secure installation and reliable guidance of the push rods. Thanks to its robust construction and precise manufacturing, the diabolo roller is ideal for use in professional greenhouse installations.

Application: Coupling unit for connecting rack PH 40-3 to Ø 27 mm push-pull tubes in shading systems Material: Zinc die-cast, galvanized Rack compatibility: PH 40-3 Tube compatibility: Ø 27 mm push-pull tube Ridder Article No.: 500208 The Coupling unit PH40 B27x1.5 ST connects Ridder rack PH 40-3 to a 27 mm push-pull tube. Its galvanized zinc die-cast construction ensures durability and corrosion resistance in greenhouse drive systems.

Application: Lift belt guidance roller for 20 mm belts Material: High-quality plastic for long-term use Function: Ensures precise and even belt movement Diaboloroll for 42 mm Tube – Black is specifically engineered for guiding 20 mm lift belts. It supports smooth and uniform motion while preventing belt misalignment or jamming. Its durable plastic construction ensures high resistance and long service life—ideal for continuous operation in demanding setups.

Application: Connects 50x50 mm square tubes in greenhouse shading system frames Material: Galvanized steel Features: Enables stable, weld-free connections - easy alignment and assembly The Square tube connector 50×50 is used to join square tubes in greenhouse shading system frames. It eliminates the need for welding and allows for faster, more precise installation. Made of galvanized steel for long-term durability.

Application: Weld-on sleeve coupling for connecting P26.5 mm drive shafts to 5/4″ steel tubes Material: Galvanized steel Drive shaft: P26.5 mm with 20 mm flat sides Tube connection: Welded to 5/4″ steel shaft (Ø 42 mm) Length: 44 mm Ridder Article No.: 421978 The Weld/sleeve coupling P26.5 B5/4″ ST L44 mm is used to connect flat-sided P26.5 mm drive shafts to 5/4″ steel tubes via welding. Its galvanized finish ensures durability and corrosion resistance in greenhouse environments.