Diabolo roll 27.32
The clip profile protects cloth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC
Pinion house unit for rack Ridder
The pinion house unit TU 5-30 works as a drive for racks 30 in greenhouse ventilations. A counter roller enables reliable and gentle guidance of the rack. Therefore you will profit from low abrasion of your ventilation system.Thanks to a plastic-bearing the pinion house unit especially fits rather simple and light-weight ventilation systems. For drives with 34 mm steel tubes. Material: Steel housing with a plastic-ring bearingRidder Art.-Nr. 500017
Window connector for TU11-22 +TU11-30PU = 10 pcs
Application: Fixes racks to ventilation flaps in greenhouse roof systems Material: Aluminum pressure-casting Mounting: Includes Inox M6 bolt for rack fixation - 2 additional M6 bolts needed for flap mounting (not included) Compatibility: TU11-22 and TU11-30 pinion housings Packaging unit: 10 pieces Ridder Article No.: 500021 The Window Connector for TU11-22 and TU11-30 securely attaches the rack to the ventilation flap. It ensures precise alignment and reliable operation in greenhouse roof ventilation systems. Made from durable aluminum die-cast for long-term use.
Rack 30-3 \Ridder TU11-30
This rack is especially suitable for standard ventilation in all types of greenhouses.The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 30 mmMaterial: galvanized steelRidder Art.-Nr.: 418548
Rack 22-3 \ Ridder TU11-22
This rack is especially suitable for light-weight ventilation in poly tunnels and -greenhouses. The end piece of the rack has no teeth. This enables a security stop as soon as the ventilation as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 22 mmMaterial: galvanized steelRidder Art.-Nr.: 417574
Pinion house protection cover 2-parts - incl. bolts 42000418 (4x) - PU = 25 pcs
Application: Safety housing for racks in greenhouse ventilation systems Material: Housing: plastic - Tube: aluminum Design: Two-part shell with dual-sided receptacle for rack protection tubes Mounting: Secured with galvanized M4×16 steel screws (included) Packaging unit: 25 pieces Benefit: Prevents injury and contamination from lubricants - compatible with insect netting The Pinion Housing Protection – 2-Part Shells is used in combination with rack protection tubes to shield racks at sensitive points in greenhouses. It prevents contact with moving parts and supports insect-free greenhouse designs. The housing is made of durable plastic and includes mounting screws.
Grease waterproof 400 g - PU = 24 pcs
Application area: Professional rack grease for treating racks in greenhouse ventilation and shading systems Usage: Annual maintenance with this grease ensures long-term, smooth operation of rack drives Application method: Can be applied to the racks using a brush Packaging: Supplied in a cartridge suitable for 400 g grease guns Packaging unit: 24 cartridges Rack grease 400 g is specially developed for maintaining racks in greenhouse systems. It provides optimal lubrication and extends the service life of rack drives. Thanks to its easy brush-on application, the grease can be distributed evenly across the rack surface. This product is ideal for professional use and helps maintain the efficiency and reliability of ventilation and shading systems.
diabolo-roll 27.32 with stamped metal housing
The diabolo roll set 1 serves as a guide for push tubes in shading systems with push-pull tube drives. Within this set the roll is built into an iron sheet housing.Material:Diabolo roll: PlasticHousing: Iron Sheet
coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208
Coupling plate for RackDrive 700 and TRN rack drives - Tube
Application: Coupling plate for mounting racks to drive tubes Material: Galvanized steel for high corrosion resistance Tube compatibility: Ø 27 mm or Ø 32 mm Rack compatibility: 30×16 mm or 30×20 mm racks (RackDrive 700 and TRN systems) Mounting: Bolt-and-nut connection Special feature: Rack centerline aligns precisely with tube centerline Ridder Article No.: 416489 The Coupling Plate Ridder is a robust mounting solution for attaching racks to drive tubes in RackDrive 700 and TRN systems. Its precise alignment and galvanized finish ensure long-lasting, corrosion-resistant performance in greenhouse environments.
Diaboloroll for 42 mm tube, black
Application: Lift belt guidance roller for 20 mm belts Material: High-quality plastic for long-term use Function: Ensures precise and even belt movement Diaboloroll for 42 mm Tube – Black is specifically engineered for guiding 20 mm lift belts. It supports smooth and uniform motion while preventing belt misalignment or jamming. Its durable plastic construction ensures high resistance and long service life—ideal for continuous operation in demanding setups.
Grease waterproof 1 L
Application: Lubrication of sliding bearings and TU rack drives Material: High-performance lithium complex grease with PTFE (Teflon) Temperature range: –20 °C to +150 °C Water resistance: Yes Packaging: 1-liter bottle (flacon) Ridder Article No.: 182056 The AXT Grease – 1 L Bottle is a premium lubricant developed for Ridder TU rack drives and sliding bearings. Its PTFE-enhanced formula ensures long-lasting, water-resistant lubrication and reduces wear even under demanding conditions.
Grease waterproof 400 g.
Application: Lubrication of racks in greenhouse ventilation and shading systems Material: High-performance specialty grease Packaging: 400 g cartridge (for grease guns) Benefit: Reduces wear and ensures smooth, long-lasting operation Ridder Article No.: 182058 The RIDDER AXT Grease – 400 g Cartridge is designed for easy application with standard grease guns. It provides reliable, long-term lubrication for rack systems in greenhouses, protecting against corrosion and mechanical wear.
weld/sleeve coupling P26.5\B5/4''\ST\L44mm\WELD
Application: Weld-on sleeve coupling for connecting P26.5 mm drive shafts to 5/4″ steel tubes Material: Galvanized steel Drive shaft: P26.5 mm with 20 mm flat sides Tube connection: Welded to 5/4″ steel shaft (Ø 42 mm) Length: 44 mm Ridder Article No.: 421978 The Weld/sleeve coupling P26.5 B5/4″ ST L44 mm is used to connect flat-sided P26.5 mm drive shafts to 5/4″ steel tubes via welding. Its galvanized finish ensures durability and corrosion resistance in greenhouse environments.
Diabolo roll 27.32 - with stamped metal bracket sideguides
The diabolo roll set 2 serves as a guide for push tubes in shading systems with push-pull tube drives. In this set the roll is built in into an iron sheet housing and equipped with a lateral guide. The side disks align the push-pull tube. Material: Diabolo roll: PlasticMounting disks:
Sleeve coupling P26.5
Application: Coupling element for 34 mm drive shafts in push-pull drive systems Material: Galvanized steel Function: Allows quick release of the shaft without removing adjacent pinion drives Installation: Screw-on – no welding required Use case: Ideal for maintenance and modular greenhouse systems Ridder Article No.: 419404 The Sleeve coupling P26.5 is a practical connector for 34 mm drive shafts in push-pull systems. It enables tool-free disconnection of the shaft, making it ideal for quick maintenance or replacement of pinion drives. Its galvanized finish ensures long-term corrosion resistance.
Weld/sleeve coupling 1" - for 1" - tubular shaft P26.5\B1\L40\WELD
Application: Weld-on coupling for connecting pinion housing RSD 250 to 1″ or 5/4″ steel tubes Material: Galvanized steel Drive shaft: P26.5 mm with 20 mm flat sides Tube connection: Welded to 1″ steel shaft (Ø 33.5 mm) Length: 40 mm Ridder Article No.: 401635 The Weld/sleeve coupling P26.5 B1 L40 is used to connect flat-sided P26.5 mm drive shafts to 1″ steel tubes via welding. It is compatible with Ridder RSD 250 pinion housings and ensures a durable, corrosion-resistant connection in greenhouse systems.
Grease waterproof 5 Kg
Application: Lubrication of racks in greenhouse ventilation and shading systems Material: High-performance specialty grease Packaging: 5 kg tin container Application method: Applied with a brush Benefit: Ensures smooth operation and reduces wear Ridder Article No.: 182051 The AXT Rack Grease is a professional-grade lubricant for maintaining racks in greenhouse ventilation and shading systems. Its long-lasting formulation reduces friction and wear, ensuring reliable operation. Delivered in a practical 5 kg tin, it is applied manually with a brush.
Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040
Application: Direct drive for shading systems with push-pull tube actuation Material: Galvanized steel Gear type: Specially hardened pinions Compatibility: Designed for use with Ridder racks H40-3 Mounting: For integration into greenhouse shading systems Ridder Article No.: 500040 The Pinion Housing TU21-40 is used as a direct drive unit in greenhouse shading systems with push-pull tubes. Its galvanized steel body and hardened pinions ensure long-lasting performance and precise motion control. Compatible with Ridder rack systems such as H40-3.
Diabolo roll 27.32 Set 3 with variable mounting plate
This diabolo roll serves as a guide for push tubes in shading systems with push-pull tube drives. This model is constructed with a rotatable plastic application and therefore it can be used in different mounting positions. Plastic lamination contributes for aligning the push-pull tubes. This diabolo roll is available on different mounting plates. Material: Diabolo roll: PlasticHousing: Iron Sheet
Diabolo roll 27.32
The clip profile protects cloth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC
Centerclip for centring shaft tube TUS 25-40- 50 pcs.
Application: Centering the drive shaft when using a weld coupling Material: Stainless steel Function: Allows shaft to be unclamped without removing other pinion drives Packaging unit: 50 pieces Ridder Article No.: 418694 The Centerclip for centring shaft tube TUS 25-40 ensures precise alignment of the drive shaft when using a weld coupling. It allows the shaft to be released without dismantling adjacent pinion drives — ideal for quick maintenance in greenhouse systems.