Cable drum 1" - type IV - Motion range

Application: Fastening 3 mm and 4 mm wire ropes Material: Galvanized steel for high durability Packing unit: 100 pieces The Wire Rope Clamps Ø3 mm (1/8″) are ideal for securely fastening 3 mm and 4 mm wire ropes. Their galvanized steel construction ensures long-lasting performance and high resistance to environmental wear.

Application: Drive cable for greenhouse shading systems Construction: 7×7 strands Diameter: 3 mm Length: 100 m Material: Galvanized steel Features: High flexibility and durability - corrosion-resistant The Aircraft cable galvanized 7×7 – Ø 3 mm – 100 m is a long-lasting drive cable for horizontal shading systems in greenhouses. Its 7×7 construction ensures flexibility and strength, while the galvanized finish provides excellent corrosion resistance.

Application: Drive cable for horizontal shading systems Construction: 7×7 strands Diameter: 3 mm Length: 1000 m Material: Stainless steel (INOX) Features: Rustproof, durable, ideal for outdoor use - compatible with slip joints The Aircraft cable INOX 7×7 – Ø 3 mm – 1000 m is a corrosion-resistant stainless steel cable for greenhouse shading systems. Its 7×7 construction ensures strength and flexibility, making it ideal for external applications and long-term durability.

Application: Drive shaft for shading and ventilation systems Diameter: 33.5 mm (1″) Wall thickness: 3.25 mm Length: 6.05 m Material: Galvanized steel The Steel tube Ø 33.5 mm / 3.25 mm – 6.05 m is designed for use as a drive shaft in greenhouse shading and ventilation systems. Its thick wall provides excellent torsional resistance, and the galvanized finish ensures long-term corrosion protection.

Application: Drive shaft for greenhouse ventilation and shading systems Diameter: 1″ (≈ 33.5 mm) Wall thickness: 2.5 mm Length: 6.50 m Material: Galvanized steel Ends: Swaged for easy insertion and bolting Packaging: Bundle of 81 pieces The Steel tube Ø 1″ / 2.5 mm – 6.50 m – 81 pcs/bundle is a robust drive shaft for large greenhouse systems. Its swaged ends allow for seamless connection using bolt set 27.32. Built for high torsional loads and long-term durability.

Application: Suitable for shading systems with suspended fabric and gable drive configuration Material: Impact-resistant plastic for high stability Function: Ensures accurate positioning of the drive shaft Packaging Unit: 25 pcs Offset bearing for 50/50 mm square tube is specifically designed for use in greenhouse shading systems featuring suspended fabric and a gable-driven layout. It accurately positions the drive shaft and supports smooth rotational movement during operation. Made from durable, impact-resistant plastic, this component provides high load-bearing capacity and long-term performance, even under challenging greenhouse conditions. Installation requires an M8 x 70 bolt and one M8 Nyloc nut (not included).

Our vertical bearing shaft supports 1" allows to set the drive shaft as close as possible to the gable end. In such a construction the shading screens do not set against the truss , but lay either over( in suspended system) or below ( in lay- flat system) the square tube, covering the whole area up to the gable end. The dalay of screens is basically not needed.The drive shaft can easily and quickly be pre-assembled on the ground. So dangerous, time-consuming works underneath the roof can be avoided.The bearings are attached onto the square tubes and locked with locking screws. If needed, they can be moved

Application: Joining 34 mm steel tubes in drive shafts Material: Hot-dip galvanized steel for superior strength and corrosion resistance Installation: Screwed together using included M8x50 bolts Highlight: Greater stability and longevity compared to welded joints Packaging Unit: 25 sets 1" Steel Tube Clamp Connectors incl. M8x50 Screws provide a secure and reliable connection for 34 mm steel tubes in drive shaft assemblies. Unlike welded joints, these clamp connectors offer improved durability and structural integrity. Each set includes M8x50 screws for quick installation. Thanks to the hot-dip galvanized finish, the connectors offer excellent corrosion protection, making them well-suited for long-term use in challenging environments.