Application: Connecting support wires to 19 mm aluminum tubes in greenhouse shading systems Material: High-quality plastic for long-term durability Feature: Raised geometry for improved sealing in specific greenhouse types Packaging Unit: 3000 pcs Lead edge tube clip L 19 is designed for securely linking support wires with 19 mm aluminum tubes in shading installations. Its robust plastic construction ensures reliable fastening and long-lasting performance under greenhouse conditions. The elevated design creates additional spacing between wire and tube, which can enhance sealing efficiency—especially beneficial in closed energy curtain systems where insulation and airflow control are critical.

Application: Preventing polyester wire abrasion on screen profiles in laid-out shading systems Material: Plastic Highlight: Connects the supporting wire with the screen profile in suspended systems Installation: Positioned in the screen profile’s screw channel and glides side to side Packaging Unit: 500 pieces The U-Shaped Profile Glider provides a protective guide for polyester wire in shading systems, preventing damage from screen profile contact. It also serves as a connection element in suspended structures. Mounted in the screw groove of the screen profile, it slides horizontally to allow flexible adjustment within the setup.

Application: Sealing overlap between fabric panels in suspended shading systems Material: Fabric-compatible plastic Function: Attached to carrier wire - picks up the following fabric panel via cord for seamless overlap Packaging Unit: 200 pcs Sealing bracket for 2 mm stainless steel wire is used to seal the transition between adjoining fabric panels in suspended greenhouse shading systems. Made from plastic that protects the screen material, it ensures a gentle yet stable attachment to the carrier wire. The bracket is mounted directly on the carrier wire and is connected to the next fabric panel using a cord. This creates a consistent overlap between panels that helps minimize light leakage and contributes to a clean and functional screen layout. The same type of wire is also used in some laid screen configurations.

Application: Universal fastening of fabric in greenhouses Material: Steel with plastic coating for added protection Diameter: 1.7–2.5 mm Length: 1000 m Special Feature: Protects textiles and increases their durability The black-coated wire rope 1x7, 1.7–2.5 mm can be tensioned horizontally or vertically and is used for universal fastening of fabric. The plastic coating protects the textiles, helping them last longer.

Application: Fastening polyester wires to universal wire holders Material: Aluminum for reliable connection Feature: Secure wire closure through crimping Packing unit: 100 pieces Aluminum Press Sleeves, Oval provide a secure fastening of polyester wires to universal wire holders. Crimping ensures a stable and permanent connection.

Application area: Fastening fabric to the clip profile of the fabric drop Material: High-quality plastic for a lightweight yet stable connection Locking mechanism: Self-locking closure for secure fixation Installation: Simple hooking without additional tools Packaging unit: 100 pieces The Screen hook is a proven solution for securely fastening fabric to clip profiles in shading and ventilation systems. Its self-locking closure ensures stable fixation without the need for additional fasteners. Made from high-quality plastic, the Screen hook offers excellent resistance to environmental influences and is ideal for long-term use in greenhouses and other demanding environments. The simple hook-in installation allows for quick setup, making the Screen hook especially suitable for professional applications.

Application area: Fastening polyester wires to lattice girders in shading systems Material: High-quality stainless steel for maximum durability Special feature: Side-mounted, available in various heights The Inox truss clamps 20 mm are specifically designed for the stable fastening of polyester wires to lattice girders in shading systems. Thanks to their high-quality stainless steel construction, they offer excellent resistance and long service life. These truss clamps are side-mounted and available in various heights, allowing flexible adaptation to different requirements.

Application: Guiding 19 mm aluminum tubes along polyester wires in shading systems Material: Galvanized steel Installation: Mounted onto polyester wire, then clipped onto the 19 mm aluminum tube Wire Guide (short) 13 mm is designed to securely guide aluminum tubes along polyester wires in greenhouse shading installations. First attached to the wire, it is then clipped onto the tube, ensuring a straight and stable movement of the fabric panels. The fixed spacing of 13 mm between wire and tube supports consistent alignment and smooth operation, especially in suspended shading systems where precise guidance is essential.

Application: Fastening uplift wires to Screen Profile I–II in shading systems Material: Galvanized steel for high stability and corrosion protection Installation: Simple mounting on the screen profile for secure wire guidance Feature: Universal compatibility with various shading system designs Packaging Unit: 50 pcs Universal Wire Guide is purpose-built for securing uplift wires in greenhouse shading systems. It mounts directly onto Screen Profile I–II, ensuring stable and reliable wire alignment throughout operation. Made of galvanized steel, the guide offers long-term durability and excellent resistance to corrosion. Its universal design makes it suitable for a wide range of shading configurations, providing flexibility and ease of integration.

Application: Quick and easy mounting of Inox wire in suspended shading systems Material: Galvanized steel Installation: Adjustable left and right after mounting Special feature: Designed specifically for suspended systems Note: Requires M6×65 bolt (not included) The Wire Tightener 50.50 with Complete Winding is designed for fast and secure installation of Inox wire in suspended shading systems. Its geometry provides optimal mounting position for this application. Once installed, the tightener can be adjusted laterally. It is also suitable for other use cases where wire or cable tensioning is required.

Application: Protecting polyester wires routed through holes in metal profiles Material: Plastic Installation: Snap-fit locking in sheet metal via integrated detent Max. Profile Thickness: 4 mm Packaging Unit: 1000 pcs Wire Guide 4.8 is a plastic insert designed to protect polyester wires that pass through openings in metal profile sections. Its integrated detent mechanism ensures secure anchoring within the sheet, preventing movement and abrasion. Compatible with profiles up to 4 mm thick, this wire guide offers an effective and durable solution to reduce wear and extend the service life of cable systems in greenhouse structures and technical installations.

Application area: Connecting 27 mm push rods with 19 mm pipes or screen profiles Material: Steel Special feature: Suitable for constructions with narrow fabric spacing The Table clamp 27.40 connects 27 mm push rods with 19 mm pipes or screen profiles that guide the fabric. It is particularly suitable for constructions with narrow fabric spacing where lightweight shading fabric is used.

Application area: Protection of fabric aprons in greenhouses Material: High-quality PVC for long-lasting use Length: 4.50 m Installation: Direct clipping onto the tensioned wire Special feature: Prevents fabric abrasion caused by direct wire contact The PVC clip profile is an essential component for shading systems in greenhouses. It protects the fabric aprons on slopes by clipping directly onto the tensioned wire, preventing the fabric from resting directly on the wire and being damaged by friction. Made from high-quality PVC, the clip profile offers a durable and reliable solution for professional greenhouse installations. Its simple clip-on installation allows for quick setup without additional tools.

Application: Retightening of already installed wires and cables Material: Galvanized steel Installation: Removable tensioning drum can be inserted without disassembly Special feature: No need to uninstall loose wires for retensioning The Wire Tightener for Retightening is ideal for correcting slack in wires and cables that have already been installed. Thanks to its removable tensioning drum, there’s no need to uninstall and reinstall the wire. The drum can be inserted into the housing without any mounting effort, making it a time-saving and efficient solution for greenhouse shading systems and similar setups.

Application area: Fastening wires to greenhouse structures Material: Galvanized steel for high corrosion resistance Drill holes: Three holes for flexible mounting options Installation: Simple striking onto the structure The Universal clamp G1 is a versatile solution for securely fastening wires to greenhouse structures. With its three drill holes, it allows flexible installation and adaptation to various mounting points. Made from galvanized steel, the clamp offers high corrosion resistance and is ideal for long-term use in humid environments such as greenhouses. Its simple striking installation ensures quick and hassle-free setup. Thanks to its robust design, the Universal clamp G1 provides reliable fixation and is a proven choice for professional applications.

Application: Fastening of support and uplift wires to screen profile I-II Material: Stainless steel Packaging unit: 50 pieces Special features: Ideal for shading systems with large-volume fabrics Easy to install With the upper wire guide, support and uplift wires can be securely fastened to screen profile I-II. It is particularly well-suited for shading systems with large-volume fabrics and ensures stable and reliable attachment.

Application: Support wire for suspended greenhouse shading systems Diameter: 2 mm Tensile strength: 1300 Nm Length: Approx. 200 m Packaging unit: Roll = approx. 5 kg Material: Stainless steel (polished) The Inox wire Ø 2 mm – 1300 Nm – 5 kg roll is ideal as a support wire for suspended shading systems. Its polished surface allows S-hooks to glide smoothly, ensuring reliable curtain movement. Corrosion-resistant and highly durable.

Application: Secure fastening of polyester wires to universal wire holders Material: Aluminum for high corrosion resistance Installation: Wire closure after fastening Feature: Ideal for shading systems and other applications Packing unit: 100 pieces Aluminum Press Sleeves, Round offer a reliable solution for fastening polyester wires to wire holders. After installation, the wires are crimped to ensure a stable connection. Made of corrosion-resistant aluminum, these sleeves are ideal for long-term use in greenhouse systems and demanding environments.

Application: Suspending wires and components in greenhouses Material: Galvanized steel for high corrosion resistance Feature: Sturdy construction for reliable fastening Packaging Unit: 100 pcs S-Hook galvanized 45/45 mm offers a robust solution for hanging wires and components in greenhouse systems. Its corrosion-resistant surface ensures lasting performance even in demanding conditions.

Application area: Connecting push rods and screen profiles in shading systems Material: High-quality, corrosion-resistant steel for long-lasting stability Installation: Easy attachment to 27 mm push rods and 19 mm pipes or screen profiles Special feature: Suitable for constructions with medium fabric spacing The Table clamp 27.60 is a reliable solution for connecting push rods to screen profiles or pipes in shading systems. It ensures stable and secure fastening, supporting the long-term operation of the system. Thanks to its robust construction, the clamp is particularly suitable for applications with medium fabric spacing and standard shading fabrics. This product is ideal for professional use in greenhouses and contributes to the efficiency and durability of shading systems.

Application area: Universal wire tensioner for tightening cables and wires in shading systems Material: Galvanized steel for high corrosion resistance Size: 115 mm Special feature: Versatile use across various applications The Galvanized wire tensioner (115 mm) is a robust and reliable solution for tightening cables and wires in shading systems. Its galvanized surface provides excellent resistance to rust and weathering. Thanks to its universal design, the tensioner is suitable for a wide range of applications in greenhouse technology and beyond.

Application: Support or fastening wire for shading fabrics and mesh strips Diameter: 2.2 mm Length: Approx. 1800 m per roll Material: Transparent polyester Features: Lightweight, corrosion-free, suitable for conventional greenhouse roofs The Polyester wire, transparent – Ø 2.2 mm – approx. 1800 m/roll is used as a support or fastening wire in lay-flat shading systems. It is ideal for greenhouses with traditional roofing and offers a long-lasting, rust-free alternative to steel wire.

Application: Support or fastening wire for shading fabrics and mesh strips Diameter: 2.2 mm Length: Approx. 1800 m per roll Material: UV-stabilized black polyester Features: Ideal for greenhouses with high UV transmission - weatherproof and durable The Polyester wire, black – Ø 2.2 mm – approx. 1800 m/roll is designed for use in greenhouses with high UV exposure. Its UV-stabilized polyester construction ensures long-term durability and resistance to environmental stress.

Application: Tensioning aid for wire ropes and cables in greenhouse systems Material: Galvanized steel for excellent strength and corrosion resistance Function: Ensures secure tightening of wires and ropes Highlight: Suitable for both manual use and tensioning devices The Spannfrosch, also known as a Wire Tension Clamp, is a dependable tool for tensioning cables and wire ropes in greenhouses. It offers secure fastening and can be operated manually or with a dedicated tensioning tool. Its robust galvanized steel build ensures both long-term durability and corrosion resistance—ideal for continuous use in professional installations.