Aluminum tube for rollup curtains 50 mm Type 1 L=6,40 m - 86 pcs/ Bundle

The splices are getting inserted into the roll-up tube. Aluminium rivets provide a reliable hold. The splices are compatible with aluminium tube 50 type I and II. Material: aluminium

This lightweight aluminium tube is used in suspended and in lay-flat shading systems as a screen guiding tube. Thanks to its very light aluminium construction it is possible to realise light shading systems, which are specially interesting for greenhouses with a wide truss-spacing. In such greenhouses it is a good alternative to the commonly used 19 mm steel tubes. Material: Aluminium

The endguide with bearing provides roll up tubes guiding at the side, that faces the tube motor. Therefore it is installed into the roll up tube. Material: aluminium

This rail is a guide for motor mount and counter-weight in Tower Roller Plus System. The counter-weight side of the rail is equipped with a slot for a plastic cover to be inserted as a protection from accidents. The guide rail can be attached very quickly into the Tower Roller System. It is very stable and perfectly suitable for roll-up screens.

<p>The Tower Roller Plus Set is part of our Tower Roller Plus drive system, which features the following properties:</p> <ul> <li>Drive system for medium and large roller screens, as well as rollable side vents and room partitions.</li> <li>Suitable for system lengths up to 120 meters with an extremely narrow installation depth of approximately 80 mm.</li> <li>Reduced weight, assembly time, and costs.</li> <li>Extremely durable and almost maintenance-free, thanks to the high-strength plastic rollers and the standard anodized aluminum profile.</li> <li>Reduced risk of accidents due to completely integrated and covered counterweights and pulleys.</li> <li>Integrated cable routing with energy chain.</li> <li>Compatible with all common motors (counterweight is adjusted accordingly).</li> </ul>

The Tower Roller Plus Set is part of our Tower Roller Plus drive system, which features the following properties: Drive system for medium and large roller screens, as well as rollable side vents and room partitions. Suitable for system lengths up to 120 meters with an extremely narrow installation depth of approximately 80 mm. Reduced weight, assembly time, and costs. Extremely durable and almost maintenance-free, thanks to the high-strength plastic rollers and the standard anodized aluminum profile. Reduced risk of accidents due to completely integrated and covered counterweights and pulleys. Integrated cable routing with energy chain. Compatible with all common motors (counterweight is adjusted accordingly).

This adapter gets inserted in roll up screen systems in between the gear motor RW 45 and a 50 mm roll up tube. It specially fits the TGU Tower Roller Plus System.Material: Milled aluminium

This adapter gets inserted in roll up screen systems in between the gear motor RW 240 and a 63 mm roll up tube. It specially fits the TGU Tower Roller Plus System Material: Milled aluminium