Adaptor for rack 160 - welded and galvanized - PU = 30 pcs

Application: Drives for push-pull shading systems in greenhouses Material: Galvanized steel Length: 2941 mm Compatibility: Ridder RSD250 and TU21-40 pinion housings Ridder Article No.: 413949 The Rack H40-3 / L2941 mm is used to move push-pull tubes in greenhouse shading systems. It features continuous external toothing and a perforation for coupling. Designed for use with Ridder RSD250 and TU21-40 gear units.

Application: Gear reduction drive for push-pull shading systems Material: Galvanized steel with specially hardened pinions Mounting: Standard with mounting straps for trusses on the right side (left or both sides available on request) Benefit: Enables very close mounting to the greenhouse truss Packaging unit: 12 pieces Ridder Article No.: 500280 The Pinion Housing RSD 250-40/RR is a robust drive unit for push-pull shading systems. Its compact design allows for tight installation near the truss, and the hardened pinions ensure long-lasting performance. Available with custom mounting configurations upon request.

Application: Shade cloth transport in lay-flat shading systems Length: 6.40 m Material: Aluminum Features: One groove for rubber seal Packaging: Bundle of 140 pieces The Screen profile I – 6.40 m – 140 pcs/bundle is ideal for large-scale greenhouse shading systems. It provides smooth fabric guidance and includes a groove for rubber sealing. Made of corrosion-resistant aluminum for long-term durability.

Application: Shade cloth transport in lay-flat shading systems Length: 6.40 m Material: Aluminum Features: Two grooves for rubber seals Packaging: Bundle of 154 pieces The Screen profile II – 6.40 m – 154 pcs/bundle is ideal for large-scale greenhouse shading systems. It provides smooth fabric guidance and includes two grooves for rubber sealing. Made of corrosion-resistant aluminum for long-term durability.

Application: Shade cloth transport in lay-flat shading systems Length: 6.40 m Material: Aluminum Features: Two grooves for rubber seals - reinforced upper edge for higher load capacity Packaging: Bundle of 126 pieces The Screen profile III – 6.40 m – 126 pcs/bundle is a heavy-duty aluminum profile designed for guiding shade cloth in horizontal greenhouse shading systems. Its reinforced upper edge and dual rubber seal grooves make it ideal for applications with higher mechanical loads.

Application: General-purpose fastening in shading and ventilation assemblies Material: Zinc-plated steel for enhanced corrosion protection Size: M6 x 75 mm Installation: Ideal with M6 nut to secure Table Clamp H 60 to screen profiles Feature: T-bolt head enables quick and secure installation Packaging Unit: 100 pcs T-Bolt M6 x 75 is purpose-built for use in greenhouse shading and ventilation systems. The zinc-plated finish provides excellent resistance to corrosion in tough environments. Its T-shaped head offers a quick-locking fit and is commonly used in combination with an M6 nut to attach the Table Clamp H 60 securely to screen profiles. The 75 mm length delivers extra holding force for heavier-duty applications.

Application: Mounting clamp pieces to screen profiles in shading and ventilation systems Material: Zinc-plated steel for high corrosion resistance Thread: M6 x 40 mm Installation: Easy fastening with M6 nut Packaging Unit: 100 pcs T-Bolt M6 x 40 zinc-plated is a universal fastener designed to secure clamp pieces to screen profiles in greenhouse shading and ventilation systems. Made from corrosion-resistant zinc-plated steel, it ensures reliable long-term use in demanding environments. With an M6 thread and 40 mm shaft, this T-bolt pairs easily with a standard M6 nut, creating a strong and dependable connection. Supplied in units of 100, suitable for both compact and large-scale projects.