Lead edge tube clip
This lead edge tube clip connects support wire with 19 mm aluminium tubes in shading systems.
Tube Clip 19 mm
The tube clip is a gentle fixation for your fabrics to 19 mm steel and aluminum tubes. The clips are made of plastic which won't damage the clamped fabric in contrast to metal. Material: plastic
Tube clip 17 mm
The tube clip works as a gentle fixation for your fabrics to 17 and 19 mm steel and aluminium tubes. The clip is made of plastic, which won't damage the clamped fabric in contrast to the metal one. Material: plastic
Sealing bracket for 2 mm inox wire
The sealing bracket seals the screen paths in suspended and lay-flat shading systems. This piece is made of plastic, that preserves the shade cloth. The bracket gets installed at the support wire to collect the following screen wih the help of the cord. Material: plastic
Diabolo roll 27.32
The clip profile protects cloth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC
Lead edge elbow fits 19
The lead edge elbow fits 19 for 19 mm aluminium tubes, that are used for carrying shading screens. This piece is adjustable for any angle required in your shading system. Premounting can easily be done down on the ground . Precise adjustment has to be finished up at the mounting position. Mounting is realized via a plug-connection, which is fixed through stump bunch marking of the aluminium tube. Compatible with 19 mm aluminium tubes and steel tubes.
tube clip, stainless
This inox tube clip provides perfect fixation for fabrics to 19 mm, especially if very firm hold is needed.Material: stainless steel
Lead edge connector 19 L
The lead edge connector 19 S is a convenient, static connection for 19 mm aluminium and steel tubes. The piece is so designed that it can be plugged and fixed through stump bunch marking. Compared to a commonly used bolting-connectors this one can be mounted quicker and easier. However the tubes cannot be disconnected from each other.
aluminum tubes 19 mm x 6,40 m
This lightweight aluminium tube is used in suspended and in lay-flat shading systems as a screen guiding tube. Thanks to its very light aluminium construction it is possible to realise light shading systems, which are specially interesting for greenhouses with a wide truss-spacing. In such greenhouses it is a good alternative to the commonly used 19 mm steel tubes. Material: Aluminium
Pillow block 1" with bearing
The pillow block with a double-shell stamped metal bracket works as a support point for 34 mm drive shafts for ventilation- and shading-systems in greenhouses. The pillow block has mounting holes for M8 bolts.Thanks to its double-shell construction the ball bearing within the bracket can be replaced, if needed. The product can be delivered with a usual ball bearing SB 207 (24000101) or with a ball bearing with a longer inner ring UB 207 (24000101).Material: Galvanized steel (housing & bearing)
Slide bearing plate B1"
The support plate works as a bearing for 34 mm drive shafts in greenhouses. It is equipped with straight mounting holes. Thanks to built -in slide bearing, which is constructed with a centred bronze ring, this support plate is very durable and suitable for applications under heavy weights. In addition this slide bearing functions as a substitute for grease. Material: Galvanized steelMounting height: Lower edge to middle of drive shaft 62 mmRidder Art.-Nr.: 503086
TGU shaft hanger-set
Application:1. Fast, easy replacement of broken shaft hangers.2. Sturdy and durable components for new and old greenhouses.3. Designed to fit most greenhouses, it can also be customized on demand.Benefits:• Less labor on repairs. No need to dismantle the shaft, our unique hangers are assembled around it - it’s a one-man job!• Adds flexibility to the construction of new systems in existing and new buildings.• Extends the life of other related parts (motors, drive pipes, structure stability) due to the specially formulated inner plastic ring which serves as bearing support and holds the drive line in its optimal position.• A better alternative to a standard support plate and other shaft hangers.• Makes complicated drive line repairs easy!
Tube connectors halfs 1" - incl. 4 bolts M8 x 45
These tube connector halves are used for reliable connection of 34 mm steel tubes for drive shafts. Compared to heat-welded connection our tube connector halves offer higher stability and durability. The connector halves are bolted to the steel tubes with the included M8x50 bolts. Material: Steel, galvanized
KST-Lager 1" 50/50
This offset bearing has been developed for suspended shading systems with gable end drive. It brings the drive shaft to an optimal position and as a support point enables its rotation. The product has been built to hold trailing load. Material: High impact reistant plastic For mounting you will need the following parts: - M 8 x 70 bolt - M8 nyloc nut
Alu-Support plate 40
Application: Support plate for fastening drive shafts in shading systems Material: Aluminum for high stability and corrosion resistance Mounting: Angled shape ensures secure attachment to structural elements Height: Center of pipe: 40 mm Special feature: Lightweight design for easy installation The Angled Aluminum Support Plate 1″ offers a reliable solution for mounting drive shafts in greenhouse shading systems. Its angled shape ensures a stable and secure installation. The high-grade aluminum provides excellent resistance to environmental conditions and long service life. Ideal for professional greenhouse applications, it enhances the efficiency and durability of shading structures.
wire support bracket 50.50
The support wire bracket is used for easy fixing of inox- wire onto square tube.The wire bracket gets clipped and screwed onto the square tube. Thanks to this fixation it can withstand high tension. For screwing you will need a M 6x65-bolt which is not delivered with the product. A significant advantage of our wire holder is its ability to be repositioned even after the wire has been set. This ensures that the ongoing installation remains flexible and can be continuously adjusted to meet changing requirements.
Plug 19 mm - black - PU = 100 pcs
Application: Sealing open tube ends in greenhouse constructions Material: High-quality plastic for long-lasting use Function: Protects against dirt, moisture, and mechanical impact Color: Black Packaging Unit: 100 pcs Plug for 19 mm tube is a practical solution for securely closing open pipe ends in greenhouse structures. It shields the interior from environmental influences and extends the lifespan of the system. The flexible lamella design ensures a tight fit, while the premium plastic material offers durability and ease of installation—even in humid or high-contact environments.
4 bearing shaft support 2"
The 4 bearing shaft supporthas been developed for central drives in lay flat and in suspended shading systems. It works as a bearing point in the system and brings the drive shaft to an optimal position within the system. Short version for 60.8 mm tubes.
Steel tube galv narrowed
This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel
4 bearing shaft support 1"
The 4 bearing shaft support has been developed for central drives in lay flat and in suspended shading systems. It works as a bearing point in the system and brings the drive shaft to an optimal position within the system. Short version for 34 mm tubes
Square tube, galv. 50 x 50
The square tube is used as a holder for some shading system components. Material: galvanized steel, 2 mm wall thickness
Offset bearing 1" - 55/34
The offset bearing is suitable for suspended shading systems with gable end drive. It sets the drive shaft to the optimal position and enables its rotation. The bearing holds tensile load.Material: Impact-resistant plastic